Erfolgreiches Debüt auf der i+e in Freiburg

08.02.2019 | in News

Es war ein Testballon – die erstmalige Teilnahme der MEKU Technologie GmbH auf der i+e 2019 in Freiburg. Und es hat sich gelohnt.

Während der drei Veranstaltungstage konnten wir zahlreiche interessante Gespräche führen, neue Kontakte knüpfen, alte Kontakte erneuern. Gerade die Kunden der ehemaligen Mühlan AG, die 2018 von MEKU übernommen und als MEKU Formenbau Werkzeugbau GmbH in die Unternehmensgruppe integriert wurde, ließen sich von unseren Kompetenzen und den Möglichkeiten, die die MEKU Gruppe bietet, überzeugen.

Die Messe hat einmal mehr gezeigt, dass der Südwesten Deutschlands und die Nordschweiz einen der stärksten Cluster der Zulieferindustrie, Fabrikausrüster und Automatisierer bilden. Und wir sind stolz dazuzugehören.

Ausbildungsplätze Werkzeugmechaniker (w/m/d) und Zerspanungsmechaniker (w/m/d) Formenbau für 2019 und 2020 | Standort Denzlingen

28.01.2019 | in Denzlingen

Zum 01. September 2019 und 01. September 2020 bieten wir noch folgende Ausbildungsplätze bei der MEKU Formenbau Werkzeugbau GmbH in Denzlingen an:

  • Werkzeugmechaniker (w/m/d) Formenbau
  • Zerspanungsmechaniker (m/w/d) Formenbau/Lohnbearbeitung

Deine Bewerbung:

Wenn wir Dein Interesse geweckt haben, schick uns bitte Deine aussagekräftigen Bewerbungsunterlagen (Anschreiben, Lebenslauf, Zeugnisse). Bitte bewerbe Dich via Email bei Herrn Alexander Ries auf alexander.ries@meku.de.

Für telefonische Vorabinformationen stehen wir gerne unter 07666 -88 22 - 0 zur Verfügung.

Das entscheidende Plus auf der i+e 2019 in Freiburg

15.01.2019 | in News

MEKU Technologie auf der i+e 2019 – der Industriemesse der Schwarzwald AG – vom 30. Januar bis 01. Februar in Freiburg… 

Die Teilnahme an der i+e in Freiburg ist eine (Heim-) Premiere für uns und für Sie hoffentlich Anlass, uns auf unserem Stand zu besuchen. Weshalb sollten Sie das tun? Weil sich im vergangenen Jahr bei uns so einiges getan hat: neueste Entwicklungen und Produkte, überzeugende Case Studies (Erfolge für unsere Kunden) sowie die strategische Weiterentwicklung der MEKU-Gruppe.

Denn die MEKU Technologie hat im vergangenen Jahr den Geschäftsbetrieb der Norbert Mühlan AG, Denzlingen übernommen und das Unternehmen als MEKU Formenbau Werkzeugbau GmbH in die MEKU Gruppe integriert. Als Teil der MEKU-Gruppe ergeben sich somit zahlreiche interessante Möglichkeiten, die wir Ihnen gerne auf der i+e 2019 vorstellen möchten.

Kurz gesagt ist die MEKU Formenbau Werkzeugbau das entscheidende PLUS in der Region Freiburg in puncto

  • Formenbau und Werkzeugbau,
  • Lohnfertigung (Fräsen, Erodieren, Schleifen, Drehen, Montage),
  • Kompetenz in Metall, Elektronik und Kunststoff,
  • komplexen mechatronische Baugruppen.

Darüber hinaus möchten wir Sie zum Dialog auf unseren Stand in Halle 2 / Stand K103 einladen:
Elektronik, Kunststoff, Metall, Mechatronik. Der One-Stop-Shop von MEKU.

Wir freuen uns auf das Gespräch mit Ihnen! Und damit’s auch sicher etwas wird, bekommen Sie hier direkt Ihre kostenlose Eintrittskarte (alternativ können Sie auch den QR-Code im obigen Messelogo mit ihrem Smartphone scannen): 

https://www.ie-messe.de/tickets/?1202154561

Diverse Ausbildungsplätze (m/w/d) 2019 | Standort Bad Dürrheim

01.01.2019 | in Bad Dürrheim

Zum 01. September 2019 bieten wir noch folgende Ausbildungsplätze an:

  • Elektroniker für Geräte und Systeme (w/m)
  • Fachkraft für Lagerlogistik (m/w)
  • Industriekaufmann (m/w)

Deine Bewerbung:

Wenn wir Dein Interesse geweckt haben, schick uns bitte Deine aussagekräftigen Bewerbungsunterlagen (Anschreiben, Lebenslauf, Zeugnisse). Bitte bewerbe Dich via Email bei: michaela.frommer@meku.de.

Für telefonische Vorabinformationen und Anfragen stehen wir gerne unter 07706/9204-36  zur Verfügung.

Start of the New Year at the i+e in Freiburg

21.11.2018 | in News

After the fair is before the fair – we have just returned from a successful electronica in Munich, and we are already in the planning for the i+e in Freiburg. From January 30 to February 01, 2019, we will be presenting the enriching interplay between our competency centres in metal, electronics, plastics and mechatronics.
This would be particularly interesting for the customers of MEKU Formenbau Werkzeugbau GmbH – formerly Mühlan AG, mold and tool making – in Denzlingen, which the MEKU Group took over in 2018. Thus we have strengthened our expertise in the field of plastic and expanded our capacity. Our booth in hall 2, booth K 103, is again a meeting place for talks and discussions. We look forward to you!

MEKU – right in the middle of the biggest electronica ever

21.11.2018 | in News

With an increase in visitors of ten percent and with a total of 80,000 visitors, the electronica 2018, which ended on November 16th in Munich, was the largest electronica of all time.

  • And we were right in the middle of it 

MEKU Technologie GmbH won over their visitors with a clear, conversation oriented booth concept. Customers, interested parties and MEKU employees met at the long counter for discussions and exchanges while having coffee and Cantuccini from small manufacturers as well as water or beer from sources and breweries from our region.

In our view a very successful fair. We look forward to the continuing discussions with our business partners and to the electronica 2020!

Invitation to an open dialogue at the electronica 2018 in Munich

30.10.2018 | in QUICKLINKS

We present the productive synergy between our competence centers for metals, electronics, plastics and mechatronics from November 13th to 16th at the electronica 2018 in Munich (www.electronica.de), the 28th edition of the world’s leading trade fair for components, systems, applications and solutions in electronics.

What you can expect when you visit our booth in hall B2 in November:

The decisive

  • Top technology that results from the interaction of our competence centers metals, plastics, electronics and mechatronics.
  • The newest case studies.
  • The decisive Plus in know-how, production technology and innovative power which we are able to offer you as a system supplier in developing and producing complex, sophisticated assemblies at the highest level of quality.
  • An open dialogue about the opportunities that arise through the meticulous teamwork between our specialists in interdisciplinary development and project teams.

We look forward to your visit and the conversation with you in Hall B2 on our stand B2.532 at the Munich Trade Fair Center.

Save the date!

MEKU Group continues strategic growth through acquisition of Mühlan AG

15.10.2018 | in News

Expansion of capacities and know-how in the area of mold making and tool making in the competency centre for plastics

The MEKU Group continues its strategic growth. Following the successful integration of the Weisshaar Group, MEKU has now taken over Norbert Mühlan AG, mold making and tool making in Denzlingen. Through this strategic acquisition, the MEKU Group strengthens its competency centre plastics and expands its capacities in the area of mold making and tool making, in the production of complex assemblies as well as in maintenance. The technological know-how of the 22 Mühlan employees, who were all taken over, supplements and expands the existing and is the perfect complement to the capacities at the locations Villingen-Schwenningen and Stockach.

Due to the extended capacities and the gained know-how, MEKU is well prepared for the growing market requirements, because the increased flexibility and process reliability guarantee that MEKU can meet quality requirements of their customers as well as its own to the highest degree. The acquisition of Norbert Mühlan AG also creates the basis for expanded market access and strengthens MEKU’s position as a value-creating partner and system supplier.

MEKU will present its latest case studies at the FAKUMA 2018

18.07.2018 | in Trade fairs + events

MEKU FAKUMA 2017

MEKU is once again represented at the Fakuma International Trade Fair for Plastics Processing Fakuma (www.fakuma-messe.de) this year.

What you can expect when you visit our booth in October:

The decisive

  • Top technology of our Competency Centre Plastics
  • Presentation of complex mechatronic assemblies
  • Case studies such as the use of the Clever Mold system in our Competency Centre Plastics, which significantly reduces set-up times on our injection molding machines and increases flexibility. In this way, we are redefining the handling of the factor “number of items” in a completely new way, as the system makes growing tool solutions possible.

We look forward to your visit and the discussion with you from October 16th to 20th at our booth in hall B2 / booth 2203-A02 at the trade fair Friedrichshafen.

Save The Date!

Clever Mold System ensures the greatest possible flexibility at the Competency Centre Plastics

20.04.2018 | in News

The Competence Center Plastics is breaking new ground in the production of very small series and prototypes. In order to be able to work more efficiently and cost-effectively, the plastics specialists at MEKU tested Hasco’s A8500 Clever Mold System over a longer period of time.

Matthias Jäger.
Matthias Jäger.

“We were looking for a solution to significantly reduce our set-up times on our injection molding machines and increase our flexibility,” explains Matthias Jäger in an interview with the industry magazine “werkzeug & formenbau”. In the recently published article, the authorized representative and Head of Sales & Development reports on the experiences that have been made while testing the Clever-Mold System and why MEKU Kunststoff has decided in it’s favor as a permanent solution. “Tools and production can now be far better aligned to a holistically optimized production,” Jäger summarizes the benefits of the clever system, which is based on its own tool philosophy, that has really convinced the specialists at MEKU. By using the Clever Mold System, production and tool production can now not only be created from the perspective of just one assembly: “We are now in a position to take better account of the whole situation on the machine.” In addition, the Hasco system allows the plastics experts to redefine the handling of the number of pieces: this can be made significantly more cost-effective, as the system makes a growing tool solution as well as a short reaction to changing market conditions possible.

By using the Clever Mold System, the MEKU Competency Centre Plastics offers mass production quality right from the start – fast, flexible, cost-effective and uncompromising. This radical change goes beyond production itself: “It also applies to design and  planning,” explains Matthias Jäger, why a lot has changed at MEKU since the test phase of the A8500. Jäger is certain: “By using this system we are very well equipped for the future. ”

Please read the whole article (German language) from “werkzeug & formbau” here: https://www.werkzeug-formenbau.de/spritzen-giessen/meku-setzt-auf-a8500-clever-mold-system-von-hasco-126.html

 

Innovation Driver with Practical Touch

25.10.2017 | in News

MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017
MEKU FAKUMA 2017 MEKU FAKUMA 2017

“Innovation Driver with Practical Touch” was the headline to the closing press release for the 25th Fakuma trade fair. This might well have been a description of the MEKU stand at the traditional industry meet, where the focus was on showcasing the MEKU Group as the “value-creating partner for that decisive +”.

The MEKU stand presented a range of technologies and solutions. The emphasis was primarily on the topic of plastics but in fact extended far beyond to cover the group’s development expertise in general, as exhibited by the complex assemblies on show.

The general feedback from the customers, suppliers and business partners who visited our stand clearly demonstrated that they fully recognise and value the advantages offered by our perfect synergy of metals, electronics and plastics. This provided confirmation that MEKU has clearly positioned itself as a system supplier along the entire value chain in the development and manufacture of complex plastic injection-moulded products, electronic applications, and mechatronic assemblies and systems.

MEKU acquires Weisshaar Kunststoffverarbeitung Formenbau GmbH; workforce and machinery all retained

16.10.2017 | in News

The MEKU Group has acquired the company Weisshaar Kunststoffverarbeitung Formenbau GmbH, based in Deißlingen, Germany, with effect from 1st November 2017. The acquisition represents an ideal addition to the company portfolio in two major respects. Firstly, the technological know-how of the 45 Weisshaar employees – all of whom will be kept on – rounds off our existing expertise. Secondly, the product lines complement each other very well. Moreover, we will now be able to expand our toolmaking and maintenance units, thanks to the influx of skilled employees (fitters and toolmakers) from Weisshaar.

Finally, the addition to our machinery pool will enable us to produce a greater volume of units, thereby ensuring that MEKU is well placed to meet the growing market demands. This will increase our market access and strengthen our market position.

MEKU gewinnt Christian Marquardt für das Qualitätsmanagement im Kompetenzzentrum Kunststoff

01.10.2017 | in News

MEKU begrüßt neue Azubis an mehren Standorten – Startschuss zur Ausbildung zum Wertschöpfungspartner

30.09.2017 | in News

MEKU begrüßt eine weitere Generation von Azubis, die in Eching und Villingen-Schwenningen ihre Ausbildung begonnen haben. Andreas Adelsberger (Werkzeugmechaniker Fachrichtung Stanztechnik; 3. von links) und Jacob Andresen (Maschinen und Anlagenführer; Bildmitte) vervollständigen das Azubi-Team in den Kompetenzzentren Metall und Mechatronik am Standort Eching. Bereits im zweiten Lehrjahr werden Sam Durner (Maschinen und Anlagenführer; 2. von links) und Thomas Knoll (Werkzeugmechaniker Fachrichtung Stanztechnik; 2. von rechts) von den Ausbildern Simon Meßner (links) und David Katzenbogner (rechts) angeleitet.

Im Kompetenzzentrum Kunststoff startet gleich ein Sextett ins erste Lehrjahr (von links nach rechts): Marcel Schmelzer (Fachkraft für Lagerlogistik), Lisa-Marie Schuster (Fachkraft für Lagerlogistik), Simon Dinkel (Werkzeugmechaniker Fachrichtung Formentechnik), Fabienne Borrmann (Werkzeugmechanikerin Fachrichtung Formentechnik), Moritz Beutelspacher (Verfahrensmechaniker für Kunststoff- und Kautschuktechnik) sowie Daniele Fanello (Verfahrensmechaniker für Kunststoff- und Kautschuktechnik) verstärken unsere Mannschaft am Standort Villingen-Schwenningen.
Wir freuen uns auf Engagement, Ideen und frischen Wind.

Mechatronics

11.07.2017 | in Contact

Raphael Cramer
Phone.: (+49) 8709 – 919-903
Mail: raphael.cramer@meku.de

Ralph Bayer
Phone.: (+49) 8709 – 919-11
Mail: ralph.bayer@meku.de

Competency Centre Metals

10.07.2017 | in Contact

Raphael Cramer
Phone.: (+49) 8709 – 919-11
Mail: raphael.cramer@meku.de

Alexander Walch
Phone.: (+49) 8709 – 919-709
Mail: alexander.walch@meku.de

Competency Centre Electronics

09.07.2017 | in Contact

Richard Küssner
Projekt- & Serienverantwortung
Phone.:(+49) 7706 – 9204-45
Mail: richard.kuessner@meku.de

Dr. Joachim Pieper
Projektverantwortung
Phone.: (+49) 7706 – 9204-36
Mail: joachim.pieper@meku.de

Competency Centre Plastics

08.07.2017 | in Contact

Matthias Jäger
Projektverantwortung
Phone.: (+49) 7720 – 3028-38
Mail: matthias.jaeger@meku.de

Frank Klausmann
Serienverantwortung
Phone.: (+49) 7720 – 3028-27
Mail: frank.klausmann@meku.de

E-Mail

08.07.2017 | in E-Mail

Meku Technologie - Kontaktformular

Energy

07.07.2017 | in Contact

Dieter Merz
Phone.: (+49) 7720 – 9746-42
Mail: dieter.merz@meku.de

Jürgen Geist
Phone.: (+49) 7720-9746-44
Mail: juergen.geist@meku.de

MEKU Corporate Group

06.07.2017 | in Contact

Ralph Bayer
Phone.: +49 77 20 660 01 – 00
Mail: ralph.bayer@meku.de

Dr. Joachim Pieper
Phone.: +49 77 20 660 01 – 00
Mail: joachim.pieper@meku.de